LanParty nF4 Manual Del Usuario página 24

2
English
Current BIOS Setting This option will save the current BIOS setting
Last BIOS Setting
User Defined Setting Bank #1/2/3/4
Bank Description
To name the BIOS setting, move the cursor to "Bank Description"
then press <Enter>. You can enter up to 60 characters. Providing a
name to the BIOS setting will allow you to easily remember the
settings in the bank.
Save to this Bank
To save the BIOS setting, move the cursor to "Save to this Bank"
then press <Enter>. Type <Y> then press <Enter>. This will save the
current setting or the last saved setting to this bank; depending on
the option selected in the "Save Setting to Bank With" field. If you
want to immediately reboot to use the new settings, make sure to
save before you exit the BIOS setup utility by selecting "Y" in the
"Save & Exit Setup" submenu.
Load from this Bank
To load the setting saved in the bank, move the cursor to "Load
from this Bank" then press <Enter>. The setting in this bank will
replace the current setting. Make sure to save before you exit the
BIOS setup utility by selecting "Y" in the "Save & Exit Setup"
submenu.
Hotkey
You can now load a BIOS setting during system boot up; bypassing
the lengthy process of entering the BIOS utility to load a setting.
Move the cursor to "Hotkey" then press <Enter>. Select the key you
would like to use to load the settings from the bank. When the
system boots up, press the key to load the setting.
SLI (for "nF4 SLI" models only)
The NVIDIA
two SLI-ready PCI Express graphics cards in a single and scalable
system. Using two identical graphics cards will provide extreme
performance allowing you to enjoy games with the most visual
effects and the most graphics demanding multimedia utilities. Dual
24
to the User Defined Setting Bank.
This option will save the last saved BIOS
setting to the User Defined Setting Bank.
® TM
SLI (Scalable Link Interface) technology connects