Parts List - artograph Super Prism Projector Manual Del Usuario

Measurements of Projections
To determine a particular scale of a projected
image, mount a 6" ruler next to the copy or draw
1" grid lines onto the copyboard itself. If specific
enlargements are frequently used from common
originals, mark the floor with tape. Position the
tape at desired distances and mark the image
size directly on the tape for future reference (i.e.
10x). Then simply align the cart, Projector Stand,
or table with the tape mark to attain that size.
Minimizing Distortion
Distortion is largely created when the projector is
not projecting squarely (perpendicular) onto the
desired surface. Imagine shining a flashlight onto
a wall. If the flashlight is shining straight ahead,
the light is a round circle. If the flashlight is turned
to an angle, either up or down or back and forth,
the circle of light is distorted. This same concept
applies with a projector. To minimize distortion,
always keep the projector level and the image
square to the wall, canvas or other vertical surface.
Projector Maintenance
Lens
Clean the lens with any lens cleaner and soft cloth or
lens tissue. Apply cleaner to the cloth – NEVER apply
cleaner directly onto the lens, as it may seep inside.
Mirror/Lamps
To clean mirror or replace lamps, first
disconnect power supply.
Loosen plastic screw near the back of the
projector next to the top glass with a coin or
screwdriver. Remove top glass and set aside.
Mirror
The Super Prism has a special front-surface
mirror which eliminates double imaging and
enhances brightness. Clean its silvered surface
with care, using a mild cleansing solution and a
soft cloth or tissue. DO NOT scrub.
Lamps
The Super Prism uses two each of a 250 watt
ECA photo lamp (110V). Replacement lamps
can be ordered from an Artograph dealer, direct
from our factory, or from your local bulb supplier
or camera supply store. To order direct from
Artograph, contact us toll-free at 1-888-975-9555,
mail the enclosed parts order form or visit us
online at www.artograph.com.
WaRninG: Shock hazard. Pull plug before
changing the light bulb.
CaUTiOn! Do not block air vents
WaRninG: never use lamps that exceed
250 watts.
4

Parts List

1. Super Lens ............................................ 225-197
2. Prism Lens ............................................. 200-705
3. Power Switch ......................................... 145-306
4. Power Cord ............................................ 145-344
5. Mirror ...................................................... 108-023
6. Lamps, Two 250-watt ............................ 106-043
220V models use two, 250-watt halogen lamps . 106-063
7. Lid/Cover ................................................ 151-523
8. Copy Clip ............................................... 151-570
9. Top Glass ............................................... 108-045
10. Right Lid Pivot ...................................... 151-565
11. Left Lid Pivot ........................................ 151-564
Warranty
You may also register your Artograph product
online at www.artograph.com.
THIS WARRANTY DOES NOT APPLY TO LAMPS.
Artograph® products are warranted to be free from
defects in material and workmanship for a period of
one year from the date of sale to the original purchaser.
Any defective product will be repaired or replaced by
Artograph® at its option, provided the product is returned,
shipping prepaid, to our factory within the warranty
period. Customer shall promptly notify either the original
seller or Artograph of any warranty claim in sufficient
detail to describe both the problem and its symptoms
along with a copy of the original purchase receipt or
other acceptable proof of purchase. All allowed returns
will be provided a Return Authorization (RA) number.
Any product received without a Return Authorization
number will be returned. Equipment repaired or replaced
under this warranty will be returned freight or postage
prepaid. The warranty period for repaired or replacement
products shall be for the same duration as the original
warranty. This warranty does not cover repair for damage
to the product, or product components or malfunctions
caused by (i) misuse, neglect, power failures or surges,
lightning, fire, flood or accident; (ii) use of products
or facilities supplied by others; or (iii) failure to follow
installation, operation or maintenance instructions.
ThE EXPRESS WARRANTIES hEREIN
CONTAINED ARE IN LIEU OF ANY AND ALL OThER
WARRANTIES, EXPRESS OR IMPLIED, INCLuDINg,
BUT NOT LIMITED TO, ThE IMPLIED WARRANTIES
OF MERChANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT,
EACh OF WhICh SELLER DISCLAIMS AND ARE
EXCLuDED. WhILE ThERE ARE NO WARRANTIES
WhICh EXTEND bEYOND ThE DESCRIPTION ON
ThE FACE hEREOF, CuSTOMER'S LOCAL LAW
MAY PROVIDE OThERWISE. SELLER ShALL NOT
BE LIABLE FOR DAMAGES, INCLUDING SPECIAL
AND INCIDENTAL OR CONSEqUENTIAL DAMAGES,
INTERRUPTION OF BUSINESS ARISING OUT OF OR
IN CONNECTION WITh PERFORMANCE OF ThE
PRODUCTS OR USE BY CUSTOMER.