Twin Star 18DM2105 Manual De Instrucciones página 4

4. Locate Hearth/Base (A) and set out
f nished side up on the f oor.
5. Insert one Wood Dowel (N) into each
of the pre-drilled holes.
6. Attach the completed Front panel
assembly from step 3 to the
Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in
the Hearth/Base. Using Bolts (L) and
Washers (M) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
7. Locate Left Side Panel (E), insert one
Wood Dowel (N) into each of the
pre-drilled holes. Attach the Side Panel
to Hearth/Base (A) and the completed
front assembly. Then use Bolts (L) and
Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
8. Locate Right Side Panel (F), insert one
Wood Dowel (N) into each of the
pre-drilled holes. Attach the Side Panel
to Hearth/Base (A) and the completed
front assembly. Then use Bolts (L) and
Washers (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-3
Completed Front
Panel Assembly
N
N
Completed Assembly
Right
F
Side
Panel
N
L
M
N
Hearth/Base
A
E
L
M
N
N
Left
Side
Panel
M
L
N