Metronic QU4Dbox Manual De Instrucciones página 82

majority of the buttons do not function correctly, restart the search (see steps 2 to
4) to find a suitable code. If the majority of the buttons function correctly, set- up
has been successful. Re-press the device button (e.g. TV) to save the code and to
terminate the set-up mode.
3 - Set up by manual search
EN
If setting up with brand name and codes is unsuccessful, you can also use the
"Manual Search" to find the correct code for operating your device.
1. Switch on the device that you like to control.
2. Point the remote control at the device. Press and hold the device button (e.g. TV)
for 3 seconds. The LED lights up and the remote is in manual set-up mode, release
the device button now.
3. Press the "Volume+" button approx. every 1.5 seconds.
4. As soon as the volume of the device (e.g. TV) changes or the device turns off,
check whether the other buttons on the remote control function correctly .If the
majority of the buttons does not function correctly, press the Volume+ approx.
every 1.5 seconds to initiate the reactive code ( manual search is continued, see
step 3 to 4). If the majority of the buttons on the remote control functions correctly,
save the code by pressing the device button ( e.g. TV) to terminate the manual
search.
Note: The Manual Search is automatically terminated if no entry occurs during a 30
seconds period.
4 - Display the code
1. Press and hold the device button (TV) and simultaneously press button 1 to display
the thousands of the 4-digit code. Count how often the LED flashes, if the LED
does not flash, the number is zero.
2. Press and hold the device button (TV), simultaneously press button 2 to display the
hundreds of the 4-digit code, Count how often the LED flashes, if the LED does not
flash, the number is zero.
3. Press and hold the device button (TV), simultaneously press button 3 to display
the tens of the 4-digit code, Count how often the LED flashes, if the LED does not
flash, the number is zero.
4. Press and hold the device button (TV), simultaneously press button 4 to display the
ones of the 4-digit code, Count how often the LED flashes.
For example for Code 0169
1. Press TV and 1 LED flashes zero times
2. Press TV and 2 LED flashes one time
3. Press TV and 3 LED flashes six times
4. Press TV and 4 LED flashes nine times
* Device code list available at: www.metronic.tv
6
technical support: soporte@metronic.com