LCD/LED Screen
Although the LCD/LED screen is made with high-precision
technology and has effective pixels of 99.99% or more, black dots
or bright points of light (red, blue, or green) may appear constantly
on the LCD/LED screen. This is a structural property of the LCD/
LED panel and is not a malfunction.
The LCD/LED screen is made with high-precision technology and
to achieve a high level of performance and picture quality, this
TV's backlight setting is set to maximize the brightness of the TV.
However, uneven brightness may be observed when the HDTV
is viewed in a dark ambient without an input source or a blank
screen. This condition is normal and not a malfunction of the TV.
Changing the Picture mode, Backlight setting, enabling the Light
Sensor, or turning on the Power management will improve this
condition.
Do not expose the LCD/LED screen surface to direct sunlight.
Doing so may damage the LCD/LED panel.
Do not push or scratch the LCD/LED screen, or place objects on
top of the TV. The image may be uneven or the LCD/LED panel
may be damaged.
If the TV is used in a cold place, a smear may occur in the picture
or the picture may become dark. This does not indicate a failure.
These phenomena improve as the temperature rises.
Ghosting may occur when still pictures are displayed continuously.
It should disappear after a few moments.
The screen and cabinet get warm when the TV is in use. This is
not a malfunction.
Avoid spraying insect repellent with volatile material on the
screen.
Avoid prolonged contact with rubber or plastic material.
Broken Pieces
Do not throw anything at the TV. The screen glass may break by the
impact and cause serious injury.
If the surface of the TV cracks, do not touch it until you have
unplugged the AC power cord. Otherwise electric shock may result.
Handling of broken glass and liquid crystal leakage
If the LCD/LED panel gets damaged, crystalline liquid leakage may
occur, or scattered broken glass may result. Do not touch broken
glass or crystalline liquid which is toxic, with bare hands as cuts,
poisoning or skin irritation may occur. Also, do not let glass fragments
or leaked crystalline liquid get into your eyes or mouth. Should either
contact your eyes or mouth, rinse the contacted area thoroughly with
water and consult your doctor.
Wiring
When connecting cables, be sure to unplug the AC power cord for
your safety. Take care not to catch your feet on the cables. It may
damage the TV set.
Electric Shock
Do not touch the AC power cord or the TV with a wet hand. If you
plug/unplug the AC power cord from the TV with a wet hand, it may
cause electric shock.
Lightning Storms
For added protection for this TV during a lightning storm, or when it
is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna. This will prevent damage
to the TV due to lightning and power line surges.
When Not in Use
If you will not be using the TV set for several days, the TV set should
be disconnected from the AC power outlet for environmental and
safety reasons. The TV set is not disconnected from the AC power
source when the TV set is switched off. To disconnect the TV set
completely, pull the plug from the AC power outlet.
Overloading
This TV set is designed to operate on a 100-240V AC supply only.
Take care not to connect too many appliances to the same AC power
outlet as this could result in a fire or an electric shock.
5