How To Use - Starblitz DUALPRO Manual De Instrucciones

How to use

1. Plug the power cable (car, AC/DC). Once
EN
connected, the device displays a light on the
LCD.
Note: The charger automatically detects the bat-
FR
tery power and displays the current power level,
on LCD screen.
2. Install first plate ; then, battery. When char-
ES
ging starts, the levels blink.
Note: Once loading is complete, remove the bat-
tery and unplug the unit.
H
L
H
– High current charging mode:
When occurred this H icon, that means high
current charging mode.
L
– Lower current charging mode:
When occurred this L icon, that means lower
current charging mode.
– Battery icon:
When the bar is full, it means that the battery
is fully charged.
– Battery capacity percent rate:
It displays the battery capacity percent rate.
– USB power:
Displayed when device charing through USB
output.
– Car Charger Icon:
Displayed when charging in car configuration.
When blinking, it means the battery cannot fit
with car charger input, please change AC input
mode or car charger 24V input.