Clean And Store Me - Elos me Guia Del Usuario

treating with
treated, another pulse will be emitted, remove the applicator after a single
pulse. Repeat these previous steps until you have covered the entire facial
area. Wait at least 10 seconds before you treat over the same spot.
Note: Always start with LOW
increase the
clean and store
1
2
3
19 EN
level. If you feel comfortable, you may
level for better results
1. Turn off the system by pressing the power button on
the base unit.
2. Place the applicator in its cradle on the base unit and
unplug the electric cable from the electrical outlet.
3. Clean the cartridge light output window with a
non-alcohol based wet wipe or soft tissue.
4. If you have used the designated
Remove the shaver or epilator from the applicator and
place the protective cap instead. Use a cleaning brush
to clean the accessories. It is recommended to use a soft
tissue or a non-alcohol wet wipe for cleaning.
5. If you have used the designated
adaptor: Remove the precision adaptor from the
applicator and place the protective cap instead.
Clean the outside surface using ONLY a dry soft cloth or a
non-alcohol based wet wipe.
epilator or shaver:
precision