IVAR EQUICALOR DC 1010 Manual De Instrucciones página 8

CHRONOTHERMOSTAT
With each subsequent touch of the keypad, the display
will light up for 10 seconds and indicate the key to press
to unlock the keypad.
2) Select OFF to cancel the protection and then press
ENTER. In this case, the display will light up at each touch
of the keypad until the next shutdown, which occurs af-
ter 30 seconds of inactivity.
Associations
[ MENU ASSOCIATIONS ]
à
Refer to the paragraph 'Association of an actuator with
the chronothermostat' on pg. 19 .
Time format (12, 24)
[ MENU TIME FORMAT ]
à PREFERENCES à
If this option is changed, the time field will be expressed
in format 24 (e.g.: 18:25) instead of format
6:25 PM). Use the Up/down
When finished, press ENTER.
Temperature measurement units
[ MENU TEMPERATURE MEASUREMENT UNITS ]
à PREFERENCES à
If this option is changed, all the temperatures will be
expressed on the display in Celsius instead of Fahren-
heit. Use the Up/down arrows to edit the setting and
then press ENTER.
Start up and shutdown optimization (Functions only ac-
tive in Winter mode)
[ MENU START UP OPTIMIZATION ]
à à
PREFERENCES
[ MENU SHUTDOWN OPTIMIZATION ]
à à
PREFERENCES
Allows enabling plant pre-activation and anticipated
shutdown in 'Automatic Mode'. ON enables optimization
12 (e.g.:
keys to configure the option.
[8]
300546US-10-14
and OFF disables it. Use the
setting and then press ENTER. The optimization process
is self-regulating and its precision during normal opera-
tion is refined each day, improving yield.
If the Start up optimization is enabled, start up takes
place in advance so that the Comfort temperature is
effectively reached at the precise moment set in the
programming parameters. Similarly Shutdown optimi-
zation (if enabled) will anticipate shutdown in order to
obtain an optimized temperature Ts when entering the
T2 time band (Ts=T -Tred with Tred equal to the value of
1
Prestart savings reduction).
Zone names
[ MENU SET ZONE NAMES ]
à à
PREFERENCES
Allows you to customize the names of each zone. To
begin, select a zone using the
press ENTER. Use the Up/down
and the Left/Right arrows to move to the next letter.
Follow the instructions in the 'Character scroll bar', lo-
cated under the name, to compose text.
To delete a letter, select the 'Blank' at the end of the bar.
When finished, press ENTER
Up/down arrows to edit the
Up/down arrow and then
arrows to change a letter
to make the change.