ION Party Boom FX Guia Del Usuario página 4

Features
12
13
13
1. Display: Displays the current radio station, battery status, and Bluetooth status.
•
Charging Indicator:
•
When the power cable is connected, movement of the battery segments shows
the battery is charging. When fully charged, all battery segments will be lit without
blinking.
•
When the power cable is disconnected, the battery segment shows the level of
the battery.
•
When the battery level is low, the bottom battery segment will blink.
•
If a front panel button is not pressed within 60 seconds, the battery level indicator
will turn off (to save energy). The battery level indicator will reappear when any
button is pressed. Also, when the battery gets to the lowest battery icon segment,
the battery level indicator will turn back on.
•
Lightning Bolt Icon: The lightning bolt icon will illuminate when the power cable is
connected to wall power.
•
Bluetooth Icon: The Bluetooth icon will be lit solid when a device is paired to Party
Boom FX.
•
Power Icon: The power icon will be lit when Party Boom FX is powered on. The
power icon will not be lit when Party Boom FX is powered off.
•
Bass Boost Icon: The Bass Boost icon will be on when the Bass Boost function is
activated. The icon will be off when the function is deactivated.
•
Link Icon: The Link icon will be on when stereo linked to another speaker. The Link
icon will be off when a single speaker is used.
2. Power Button: Turns Party Boom FX on or off. Please note that while Party Boom FX is
connected to a power source, it does not need to be powered on to charge the battery.
When the power is on, the display will show the power indicator.
3. Bass Boost: Press this button to enhance the overall bass frequency response.
4. Radio Selector: This button sets the Radio to FM1, FM2, AM or turns the radio off.
5. AM/FM Presets: Store a favorite radio station and quickly tune to a preset radio station.
There are 4 numeric positions to store AM band presets and 2 banks of 4 numeric
positions each to store FM1 and FM2 band presets.
6. Bluetooth Button: Press and release this button to start pairing. Press the Bluetooth
button to disconnect a paired Bluetooth device.
4
2
5
8
3
1
8
7
10
15
4
14
6
9
11