Storing And Repairing Your Microwave Oven - Buffalo GK642-E Manual De Instrucciones

• Accumulate
• Prevent the door from closing correctly
Clean the microwave oven cavity right
after each use with a mild detergent
solution, but let the microwave oven cool
down before cleaning in order to avoid
injury.
When cleaning the upper
part inside the cavity, it will
be convenient to turn heater
downward by 45 ° and clean it.
(Swing heater model only)
STORING AND REPAIRING YOUR
MICROWAVE OVEN
A few simple precautions should be taken
when storing or having your microwave oven
serviced.
The oven must not be used if the door or
door seals are damaged:
• Broken hinge
• Deteriorated seals
• Distorted or bent oven casing
Only a qualified microwave service technician
should perform repair
GK642-E_XEU-DE68-04280B-01_EN.indd 8
NEVER remove the outer casing from
the oven. If the oven is faulty and needs
servicing or you are in doubt about its
condition:
• Unplug it from the wall socket
• Contact the nearest after-sales service
centre
If you wish to store your oven away
temporarily, choose a dry, dustfree place.
Reason : Dust and damp may adversely
affect the working parts in the oven.
The Light bulb should not be replaced in
person for safety reasons.
Please contact nearest authorised Buffalo
customer Care centre to arrange for a
qualified engineer to replace the bulb.
WARNING
Only qualified staff should be allowed to modify or
repair the appliance.
Do not heat liquids and other food in sealed
containers for microwave function.
For your safety, do not use high-pressure water
cleaners or steam jet cleaners.
Do not install this appliance; near heater,
inflammable material; in a humid, oily or dusty
location, in a location exposed to direct sunlight and
water or where gas may leak; on un level ground.
English - 8
2014-06-27 6:52:50