ExSilent Ytango Manual De Usuario página 20

The daily use of Ytango
The Ytango Pro AirTAP is defaulted to use a
single tap to change memories. This mode
requires the user to tap the ear once to switch
memories. The dispenser can change this to a
two-tap memory change if desired. This mode
requires the user to tap the ear twice to switch
to the next memory. Should the user not want
to use the different programs, the AirTAP
function can also be disabled.
After inserting the battery, the Ytango
instrument will start in program one. Gently
tapping the ear will produce two beeps,
indicating that program two has been activated.
After another gentle tap, three beeps will be
heard indicating that program three has been
activated. A maximum of four programs can be
set up. While program four is active, a gentle tap
sets the device back into memory one. One beep
will be heard indicating memory one is active.
20 English