Battery Handling; Transport And Storage - Husqvarna QC330 Manual De Instrucciones

Operation
WARNING! Risk of electric shock and
!
short circuiting. Use approved and intact
wall sockets. Make sure that the cable is
not damaged. Replace cable if it appears
to be damaged in any way.
Connect the battery charger
• Do not use product when a thunderstorm is
approaching.
• Use the battery charger only when the surrounding
temperature is between 5 °C and 40 °C.
• Use provided cable.
• Connect the battery charger to the voltage and
frequency specified on the rating plate. LEDs on
battery charger flash 1 time. (4)
Connect the battery to the battery
charger.
The battery must be charged before using it the first time.
The battery is only 30% charged when delivered.
• Ensure that the battery is dry before it is connected to
the battery charger.
• Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger. (1), (2)
• The green charging light on the charger is lit when the
battery is connected to the battery charger.
• The battery will not be charged if the battery
temperature is over 50 °C. In that case the battery
charger will actively cool down the battery. The green
charging light on the charger will flash during cooling.
When battery has been cooled down, the light will
stop flashing and charging procedure continue as
normal. (4)
• When all LEDs are off the battery is fully charged.
Press battery indicator for battery status. (7)
• When the battery is fully charged the battery charger
will stop charging. Remove the battery from the
battery charger when it is fully charged.
• Pull out the plug. Never jerk the power supply cable to
disconnect it from the wall socket. (3)

Transport and storage

• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
• Store the battery charger where the temperature is
between 5 °C and 45 °C and never in direct sunlight.
• Store the battery charger only in an enclosed and dry
space.
• Be sure to store the battery separate from the battery
charger.
6 – English

BATTERY HANDLING

Maintenance
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
Fault codes
Troubleshooting the battery and/or the battery charger
during charging. (5), (6)
Battery
Battery charger
Possible
LED display
faults
Error LED Temperature
flashing deviation.
Cell
Error LED is lit difference too
much (1V).
Possible
LED display
faults
Error LED Faulty
flashing battery.
Faulty
Error LED is lit
charger.
Possible action
Use the battery
charger only when
the surrounding
temperature is
between 5 °C and 40
°C.
Contact your service
agent.
Possible action
Contact your service
agent.
If the warning LED
on the battery
charger lights solid
red, there is a fault
with the charger.
Disconnect the
battery charger from
the wall socket for
approx. 2 min.
Connect the battery
charger to the wall
socket and i f the
warning LED still is
solid send the
charger to a
Husqvarna service
workshop.