Using The Microphone - Zoom Am7 Manual De Instrucciones

NOTE
• The USB Type-C connector does not have a front or back, but if you connect the Am7
to the device upside down compared to the illustration above, the left and right stereo
channels will be reversed.
* The left and right stereo settings can be reversed in Handy Recorder app. This setting
is stored in the Am7 itself.
HINT
If an authentication error or other problem occurs, the red LED will blink dimly.
2.
Connect headphones, for example, to the stereo mini jack on the Am7.
Use the Handy Recorder app to adjust the volume of the headphones or other device connected
to the Am7 stereo mini jack.
The volume level set using the Handy Recorder app is saved in the Am7 and will be applied when
using the Am7 with other applications.

Using the Microphone

Changing the mic orientation
1.
Turn the M-S stereo mic to change its orientation.
Rotate the arrow on the top of the mid mic toward the subject of
recording.
Audio position: Use this position when pointing the connected device
toward the sound source.
Video position: Use this position when recording video with the built-in camera.
NOTE
Hold the Am7 to the connected device tightly to prevent disconnection when using its
switches or changing its mic orientation. Use of excessive force could cause
disconnection and even damage the connector.
Adjusting the stereo width
1.
Move the stereo width switch.
90°: Record with a stereo width of 90°.
90˚
120°: Record with a stereo width of 120°.
120˚
M-S
M-S: Record without setting the stereo width using the Am7 . Adjust the stereo width
after recording using the Handy Recorder app. When used with apps other than
Handy Recorder, this setting will function as though set to 120º.
Audio position Video position
3
Mid mic
top arrow