Check the cable hoist at regular intervals for signs of damage. The control switch
must be in good condition.
Have repair and servicing work carried out only by authorized workshops by a
trained electrician. Repair work must only be carried out by a trained electrician,
otherwise the machine may cause accidents.
Do not switch the appliance on and off quickly (inching mode).
Always concentrate fully when operating the cable hoist.
Do not stand or work under the raised load.
Make sure the steel cable is correctly wound around the reel and the pitch is equal
the cable diameter.
3.
General Guidelines
Refer to the Velleman
manual.
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
6
7
8
9
V. 04 – 12/06/2019
WEH200/WEH300
®
Service and Quality Warranty on the last pages of this
fastening bar
fastening hole for hook
drum
lever for max. cable length
auto stop mechanism lever
steel cable
cut-out weight
hook
emergency stop switch
push button
10
remote control
11
power cable
12
13
control cable
14
motor
return roller
15
additional hook
16
remote control cable
17
5
©Velleman nv