Replacing The Bulb - Heatsail DOME Manual Del Usuario

3. Maintenance
3.1 Cleaning
Your DOME® must be cleaned on a monthly basis.
The electrical supply must be disconnected via the installation's mains switch or by dis-
connecting the plug before cleaning activities can commence. Cleaning may only be
done with a dry and soft cloth. Do not use any abrasive cloths. Do not use detergents.
Using a high pressure and/or steam cleaner is prohibited. Cleaning is only permitted
once the DOME® has completely cooled down.
Non-compliance with these rules may compromise the safety of the device. Heatsail will
not be held responsible for damage resulting from non-compliance with the instructions
regarding cleaning.
3.2

Replacing the bulb

Your DOME® is supplied with a R7S 230V/120 Watt (78mm) halogen bulb as standard.
The maximum permitted output power is 120 Watt.
The electrical supply must be disconnected via the installation's mains switch or by dis-
connecting the plug before the bulb can be replaced.
You can replace the bulb by carefully sliding the glass upwards. Use tools like a screw-
driver to hold the glass up. The bulb is held in place by a spring. Take the bulb out by
first pushing it to the left or right and thereby releasing it from its socket. Subsequently
insert another bulb. Please be careful never to touch the halogen bulb with your own
bare fingers, as this will significantly reduce the bulb's life.
3.3 Inspection
The DOME® must be subjected to an annual inspection.
The user is not authorised to carry out his own inspections and repairs. Inspection of
the DOME® must exclusively be carried out by qualified and authorised technicians, in
accordance with Heatsail's applicable standards and regulations. Qualified people are
understood to mean: people who have completed a technical training course for the
installation of outdoor heating and who are familiar with the applicable electricity laws
and regulations.
User manual 7