Convenience Functions - Sansui HDLCD1955B Manual De Instrucciones

You can change the default settings by pressing the Menu button on your remote, then select the one of the
icons at the top of the menu - follow the On-Screen prompts to set your preferences.
Selected Items
(Picture)
Picture Preference
Memory
Sports
Standard
Movie
Brightness / Contrast / Color / Tint /
Sharpness
Color Temperature
Advanced Video
DNR
Backlight
PC
Auto Adjust
Hor Position
Ver Position
Phase
Clock
Reset
(Audio)
Balance / Bass / Treble
Surround
On / Off
Equalizer
Off / Rock / Pop / Live / Dance /
Techno / Classic / Soft
SPDIF Type
PCM / Off / Dolby Digital

Convenience functions

Your personal preferences
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
You can adjust the picture to your preference.
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)
/ Memory.
Adjust R Gain, G Gain and B Gain.
Sometimes it is not possible to input a high-quality
HD signal. The actual signal input is too small and
Low / Medium /
noisy, e.g. a video lm in letterbox format, or a
High /
noisy analogue cable TV signal. DNR can slightly
Off
reduce interferences caused by the faulty input
signal.
You can use the Backlight feature to adjust the
screen brightness for improved picture clarity.
Hor Position, Ver Position, Phase and Clock are
adjusted automatically as per the input PC video
signal.
• When PC-input mode was selected and a PC-
signal was input, Auto Adjust will be performed
automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the horizontal (Phase) interfering lines.
Eliminates the vertical (Clock) interfering lines.
Select "Reset" to reset Picture Preference,
Brightness, Contrast, Color, Tint, Sharpness, Color
Temperature, R Gain, G Gain, B Gain and Backlight
to the factory preset values.
You can adjust the sound quality to your
preference.
The Surround feature processes the audio signal
to expand the listening eld wider and deeper to
create a 'pseudo surround-sound' from the TV's
speakers.
The feature works with stereo signals from TV
•
broadcast or AV input.
You can change the characteristic of audio
frequency.
Select the audio format from SPDIF.
You can only hear Dolby Digital audio through the
•
ampli er equipped with a Dolby Digital decorder.
Dolby is a trademark of Dolby Laboratories.
•
There is no sound output from the ampli er when
•
set to Off.
Setup hint
17