ITS EKSELANS MD HD Easy Manual De Usuario página 6

PSU connected
Detected HDMI source
Press to access the channel menu
•
Press to access the attenuation menú
•
Press + to set the output channel [5...12 + 21...69]
•
Press + to set the desired attenuation [0...15dB]
•
Press + to set a Program Id [1 ... 34]
•
Press while connecting the power supply Factory default values. "rs"
•
will appear on the display.
For advanced settings, download the SW "
•
www.ekselansbyits.com and connect the modulator to the computer by using
a Type A / Type B USB cable.
Note: In case of using more than one modulator for the same receiver or TV
•
set, it is necessary to modify the "Program ID" so that they have different
values.
EK_MDHDSoft " from the website:
EN