Mark SYM Manual De Uso

Flood Light Asym and Sym
We hope our products and services meet your requirements, but should this not be the case, we
kindly ask you to contact us directly to help us supply you and all our customers with better and better
quality, The product you purchased has been manufactured with maximum care and selected
components, but should you, for reasons beyond our control, have received it damaged, we kindly ask
you to contact the dealer who supplied the product to you, To help you in this casualty, a form is
supplied at the end of this manual. Our guarantee covers all structural and manufacture defects for
one year from the date you purchased the product. Should you have Complaints on this device, we
kindly ask you to contact us and give us proof of purchase date. The instructions given here below
ensure safe and correct usage of this product.
♦ this product reaches high temperatures. Avoid any direct contact with its metallic parts.
♦ this product is designed for indoor use only, for details on maximum ambient temperature. Minimum
distance from flammable objects and use field (angle). Please refer to what indicated on the
product label.
♦ this product must be fitted with a front protection shield (wire guard or safety glass). Should this mot
be supplied as a standard accessory, please make sure you buy it separately and install it before
using the product.
♦ before installing or replacing the lamp disconnect the product from the mains supply. Should the
product not be fitted with a micros witch disconnect or as a standard.
♦ replace the lamp, the protection shields and the lenses (if fitted) if damaged or deformed by heat.
Make sure the lamp and the protection shields are cold before attempting to remove them. To
perform a correct installation of the lamp, please refer to the lamp manufacturers instructions
included in the lamp box.
♦ this product must be fitted with a secondary fixing system such as a safety chain or bond. Should
this mot be supplied as a standard accessory, please make sure you buy it separately and install it
before using the product.
♦ fixing and replacement of any component of this product must be carried out exclusively by
professional personnel and only with original components.
♦ replacement of any part of the wiring system must be carried ort exclusively by professional
personnel in compliance with the original wiring diagram and with components identical or
compatible with those originally fitted.
♦ installation of this product must be exclusively carried out by professional personnel in compliance
with the safety
norms in force in the country where the product is used.
Installation
This product is fitted with a suspension stirrup rotating around the body of the product. Thus allowing
the product to be installed suspending or standing. The stirrup is fitted with a Φ12mm clear hole for
the attachment of a hook clamp or a stand picot. Make sure the structure you are fixing the product to
can stand the product load.
Color Filter:
It is strongly recommended you use only high temperature color filters (gel) in polycarbonate or
similar specifications material.
(500/1000W)
User Manual
- 1 - FLOODLIGHT SYM/ASYM