HumanTechnik iBell2 Instrucciones De Servicio página 19

Troubleshooting
Symptoms
The »iBell-2« does not blink
when a call/text message has
been received.
»iBell-2« blinks although no call
and/or text message has been
received.
The red LED under the reset
button is constantly blinking.
I have connected the »iBell-2«
with a wireless Humantechnik
alerting system, but it is not trig-
gering.
Possible causes/remedy
Check whether the batteries have been
inserted correctly and are fully charged.
Check whether the longest and strongest
vibration alarm has been set on your mo-
bile phone.
The device is very close to a strong wi-
reless signal.
Press the reset button and put the mobile
phone back in the housing.
The device was placed on an uneven or
vibrating surface (e.g. worktop with kit-
chen equipment).
The mobile phone was not placed in the
housing carefully.
Battery indicator:
Insert new batteries.
Ensure that the »iBell-2« is connected to
an „acoustic" transmitter. Ensure that all
the leads are connected properly. Adjust
the sensitivity to the highest setting.
EN
English 19