Ltc Audio FREESOUND-MINI-BK 10-7074 Manual De Usuario página 2

Contents of the carton
1x Bluetooth speaker FREESOUND-MINI
1x AUX/USB DC 5V charging lead
1x manual
Charging the Bluetooth Speaker
Plug the pin of the USB 5V DC charging lead into the USB/AUX socket on the side of the speaker. Plug the other end into a USB
port on your computer or any other device allowing USB charging.
Location of controls
ON/OFF switch
Built-in Microphone (to answer phone calls)
MODE button: Press to toggle between BLUETOOTH mode and AUX mode.
 VOL+ button: Quick press for next song; Long press to increase volume
  /  button: Short press to pause/play music/ answer / end an incoming phone call. Double-click: Last number redial. Log
press >3 seconds: Reject the phone call. Please note: The speaker must be in Bluetooth mode to benefit from the free-hands
feature.
 VOL- button: Quick press for previous song
USB/AUX socket: USB charging socket if the supplied lead is connected to a USB port able to charge the built-in battery.
AUX input if the 3.5mm audio connector of the supplied lead is connected to an AUX device such as MP3/MP4/CD/PC, etc.
HEADPHONE jack
USB input: Connect a USB stick with music files
Micro SD/TF: Connect a micro SD/TF card containing music files
Pairing the speaker with a Bluetooth enabled device
Keep the speaker and the Bluetooth device within 1m of each other during the pairing process. Push the ON/OFF switch to ON
position. A voice says: BLUETOOTH mode and the blue LED lights up. Wait 2 seconds and press the  /  button. The blue light
will flash and the unit is in pairing mode. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth
devices. If there are no paired devices in range when the speaker is turned on, it will go into pairing mode automatically. If a
paired device is in range, the speaker will connect to it automatically.
When the Bluetooth device finds the speaker, select FREESOUND-MINI in the list of found devices. If required, enter the
password 0000. Select OK or YES to pair the 2 units.
Contenu du carton
1x enceinte Bluetooth FREESOUND-MINI
1x cordon en 'Y' USB/Jack 3,5mm pour charger la batterie ou brancher une source AUX
1x manuel
Charger la Batterie
Branchez la fiche mini USB du cordon fourni sur l'entrée USB/AUX de l'enceinte. Branchez l'autre extrémité sur un port USB de
votre ordinateur ou autre appareil permettant la charge par USB.
Description des contrôles
• Interrupteur Marche/Arrêt (ON/OFF)
• Microphone intégré (pour répondre aux appels téléphoniques)
MODE : Appuyer pour basculer entre le mode Bluetooth et AUX.
•
• Touche /VOL+: Pression courte pour avancer au titre suivant. Pression longue pour augmenter le volume

GB
BLUETOOTH SPEAKER
;
Long press to decrease the volume
F
ENCEINTE BLUETOOTH
2