Descargar Imprimir esta página

Coby CHBT-707 Manual De Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION
Thank you for purchasing the CHBT-707! Please read this manual
fully before using this device. The terms used within will become more
familiar as you use your headphones.
CHARGING
Charge your headphones fully before your first use. To charge, insert the
microUSB cable into the charging port, and connect to a power source.
When it is charging, the indicator light will glow red. After it has finished
charging, the indicator light will go off. Charging time takes up to 2
hours.
When the headset is running out of battery, the blue indicator light will
appear and an alarm sound will be heard. Please charge the battery
immediately. If the headphones are used after this warning, they will
automatically turn off after 5 to 10 minutes.
BLUETOOTH
To connect the headphones to your audio device, first turn the
headphones on by pressing the Power Button. The headphones will
make a noise when they are turned on, and a blue indicator light will
flash when they enter Bluetooth
Mode, press and hold the Mode (M) Button until the lights flash blue.
Open the Bluetooth
"CHBT-707." If asked to enter a passcode, enter in "0000" or "1234."
When the headphones have connected successfully, they will make a
confirmation sound.
CONTROLS
TO:
Power On/Off
Answer or End a Call
Decline an Incoming Call
Play or Pause a Song or Video Press the 4/; Button once.
Go to the Previous Track
Go to the Next Track
Increase Volume
Decrease Volume
Change Mode
US
®
®
Mode. If you are not in Bluetooth®
®
function on your audio device, and connect to
Press the Power Button.
Press the Call Button.
Hold the Call Button for 3 seconds,
then release the button.
Press the 9 Button once.
Press the : Button once.
Press and hold the : Button.
Press and hold the 9 Button.
Press the M Button once.
2
DO THIS:

Publicidad

loading