Solid State Logic X-Desk Guia De Instalacion página 9

Specifications
Physical *
Depth 310mm / 12.25" (7 RU)
Height 120mm / 4.75"
Width 434mm / 17.1"
484mm / 19"
Weight 4.8kg / 10.5 pounds
Power < 40 Watts
Boxed size 320mm x 550mm x 80mm
19.75" x 15.2" x 7.5"
Boxed weight 6.6kg / 14.5 pounds
* All values are approximate
Environmental
Temperature Operating:
Non-operating:
Max. gradient:
Relative Operating:
Humidity Non-operating:
Max. wet bulb:
(non-condensing)
Vibration Operating:
Non-operating,
power off:
Shock Operating:
Non-operating:
Altitude Operating:
(above sea level) Non-operating:
EMC Performance Criteria
Line level inputs and outputs
Measure at mid-gain, noise <–56dBu
Connections
height when rack mounted Power
I/O
depth in rack
iJack
casing only
Speakers
including rack ears
Headphones
Performance
Channel Line/Alt In to Channel Out (post fader):
+5 to 30 deg. C
Channel Line/Alt In to Mix Buss (single fader):
–20 to 50 deg. C
15 deg. C/hour
20 to 80%
5 to 90%
29 deg. C
< 0.2 G (3 – 100Hz)
Electro Magnetic Compatibility
< 0.4 G (3 – 100Hz)
EN55103-1:2009, EN55103-2:2009
< 2 G (10ms max.)
Environments E1, E2, E3 and E4
< 10 G (10ms max.)
0 to 3000m
0 to 12000m
Braid-screened cables should be used where applicable
Star Quad cables should be used where applicable
IEC320 3-pin connector, 100 – 240 Vac, 50 – 60 Hz
25-pin D-type socket, Zi > 10kΩ
Un-balanced, 3.5mm Stereo Jack, Zi > 47kΩ, +12dB gain
Balanced, 3-pin XLR-M, Zo ≈ 100Ω
Un-balanced, 0.25" Stereo Jack, Zo ≈ 40Ω
Frequency Response 10Hz – 40kHz
THD+N < 0.05% (20Hz – 20kHz)
Noise < –83dBu (20Hz – 20kHz)
Headroom > +24dBu (into 10kΩ)
Frequency Response 10Hz – 40kHz
THD+N < 0.05% (20Hz – 20kHz)
Noise < –77dBu (20Hz – 20kHz)
Headroom > +24dBu (into 10kΩ)
Initial in-rush current 55A
5 sec in-rush current 55A
EN
DE
ES
0.2dB
FR
0.3dB
IT
JP
5