Installation - WEG CFW-11M Guia De Instalacion

Position Material
1 10883330
2 10884898
3 10881923
4 10882019
5 10883499
6 10884510
7 10883439
8 10884757
9 10888136
10 10051025
11 10254506
12 10050963
13 10412546
NOTES!
- M5 screws recommended tightening torque: 5.0 Nm ± 15 %.
- M6 screws recommended tightening torque: 8.5 Nm ± 15 %.
- M8 screws recommended tightening torque: 19.0 Nm ± 15 %.

4. INSTALLATION

- Rack assembling according to figures 3 and 4.
- Installation of the rack inside the cabinet according to figures 7 and 8.
Table 2 - Rack 3 bill of materials
Drive front bracket
Bottom base brace
Left side cover
Right side cover
Rear fixing bracket
Rear cover
Support guide low
Base rack fixed
Internally threaded guide pin
Hex/Phillips with captive washer M8 x 20 mm (0.8 in) screw
Slotted/Phillips flat head M5 x 0.8 x 14 mm (0.5 in) screw
Slotted/Phillips flat head M6 x 1.0 x 16 mm (0.6 in) screw
Hex/Phillips with captive washer M6 x 16 mm (0.6 in) screw
Figure 3 - Assembling of the rack for 2 power modules
RACK 3
Description Quantity
3
2
1
1
4
1
6
1
12
18
24
53
9
7