Adding An Additional Powerlan Ns-6701; Pc Help Programme (Utility) - Topcom POWERLAN NS-6701 Guía De Instalación Rápida

6 Adding an additional Powerlan NS-6701

A Powerline network can be created with up to a maximum of eight
Powerlines. If you already have two Powerlines in operation, you can
add a maximum of six.
To add a Powerline, follow the procedure set out below.
1. Plug the extra Powerline (NS-6701) into the power socket, and press for
10 seconds. The on/off light will flash slowly (0.5 seconds on/0.5 seconds
off).
2. Push down for two seconds on the key on one of the Powerline plugs
that is already in operation.
The on/off light will flash slowly (0.5 seconds on/0.5 seconds off).
3. Within two minutes, push down the key on the extra Powerline plug
for two seconds.
Once the connection is complete, the on/off light will stop flashing
Before adding the new Powerline, it is recommended that
the network passport for this plug be changed by pushing
down the "reset/simple connect" button for 12 seconds.
A Powerline that has already been used in another
network will still have the password for that network,
which means that the "reset/simple connect" button
mechanism will not operate.

7 PC help programme (Utility)

You can find all available information and spare parts at service.tristar.eu!
PowerLan NS-6701
9