Connections En Operation - König Electronic KN-HDMIMAT10 Manual De Uso

Front panel push button selection:
The front panel push button is used to select which channel is currently displayed on the HDTV.
Pressing the button during normal operation will cause the next channel to be selected.
Remote control selection:
The channel can also be selected by the remote control. Push the IR code button on the remote panel
for 2 seconds.
Connections:
Front view:
Rear view:
1) Power switch
2) Power indication LED
3) Infra Red eye
4) Selected input indication LED for output port 1
5) Selected input indication LED for output port 2
6) Input selection button for port 1
7) Input selection button for port 2
8) HDMI output ports 1 & 2
9) HDMI input ports 1 ~ 4
10) Power adapter connection
11) Input port selection buttons
12) Output port selection buttons

Connections en Operation:

Before installation, please make sure all devices you wish to connect have been turned off.
• Connect the HDMI input source into the Matrix (Input cables are optional)
• Connect the HDMI display devices into the HDMI Output ports.
• Insert the DC side of 5 V power supply into the Matrix and then connect the AC side of the power
supply into the wall outlet.
• Power on all input and output devices.
3