Programming Scenarios; Creating A Scenario; To Create A New Scenario - SOMFY Impresario Chronis io Guia De Instalacion

5.

PRoGRammING SCENaRIoS

5.1. Creating a scenario

Scenarios are programmed using the remote control
transmitter in manual mode (off its wall mount).
The Impresario Chronis io lets you program up to 16
different scenarios. 3 preset scenarios are available as soon
as the system is set into service:
Open-sy
• " ": open all applications,
Atm.-sy
• " ": position applications at their half way point,
Close-sy
• " ": close all applications.
Scenarios are programmed in the

5.1.1. To create a new scenario

Note: This operation is only possible if all the io products
are paired with the Impresario Chronis io remote control
transmitter. If not, refer to the Installation guide or an
installer.
---New---
Choose "
Enter name
Choose "
by pressing (i) or (ok).
Enter name
" ": enter the scenario name and confirm it by
pressing (ok).
Choose name
" ": choose the scenario name from the list
and confirm by pressing (ok).
Use the local remote control to place the products making
up the scenario in the desired positions.
Once all of the products making up the scenario are in the
desired position, confirm by pressing (ok).
Note: You must move all the products you want to include in
a scenario, even those already in the desired position.
G
TIP
• To create a new scenario, you can also duplicate and
modify an existing scenario.
Copyright © 2009 Somfy SAS. All rights reserved.
5015149B00_ImpresarioChronis_io.indb 7
" >
Menu Scenarios
" and confirm by pressing (i) or (ok).
Choose name
" or " " and confirm
Impresario Chronis io
d " .
menu
New scen.
Enter name
Choose name
Procedure
completed
successfully
7
30/03/10 15:01:20