Troubleshooting; Technical Data - Beper 90.002 Manual De Instrucciones

Thermoelectric refridgerator Use instructions
TROUBLE SHOOTING
Symptoms
No cooling
Not cold enough temperature
inside
Peculiar smell inside refrige-
rator
Inside light flash
Frost on the cold sink

TECHNICAL DATA

Power: 70W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
Possible cause
Plug not put in
Low voltage
Fuse broken
The refrigerator is placed too
near heat source;
Bad ventilation;
Fans don't work;
The door is not closed tightly
or opened too frequently or for
too long time;
Check whether there is any
sour inside
Set temperature higher than
inner temperature;
The automatic defrost function
start to work
Too much humidity or too low
temperature inside the case
14
Solutions
Put in the plug
Ensure normal voltage
Change fuse
Keep the refrigerator away
from sunshine or other heat
source;
Place the refrigerator in the
area with good ventilation and
keep things away from the
fans;
Check whether the plug is
connected or change the fan;
Close the door tightly and
don't open the door too fre-
quently or for too long time.
Wrap the source or take it out
Adjust the adjustor
Normal function. No repair
needed
Output the plug, stop the
power, and defrost by hand,
Connect power again when
the ice thaws