Display Information; Safety Precautions - König CMP-USBMICRO20 Manual De Uso

C. Display information
1. Capture mode indicator
2. Zoom indicator
3. Single picture icon
4. Battery capacity
5. Date
6. Picture size
7. SD card indicator
D. Using the microscope in PC cam mode
Note: Please install the microscope driver before you use the microscope in PC cam mode.
Setting up PC cam
1. Turn the microscope power on and press the FUNCTION button to select the setup function. Press the
OK button to confirm. Press the RIGHT button to select USB connection.
Select the PC cam. Press the OK button to confirm.
2. Connect the microscope via the USB cable to a computer.
3. There are many methods to view your image in PC cam mode if you have video software.
For example: Double-click "My Computer", and then click "Standard Camera".
You can live view the PC cam mode now.
For more functions check the full manual on CD.
In this manual you can find the specifications and advanced functions of the device.

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective holders and
are hereby recognized as such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for these
products.
8. Memory capacity (remaining number of storable pictures)
9. Video mode indicator
10. Battery capacity
11. Memory capacity (remaining record time of storable video)
12. SD card
13. Video size
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur. Do not expose the
product to water or moisture.
3