Technibel Climatisation K70D042ZAA Manual De Instrucciones página 6

D: FAN SPEED selector
button
(AUTO)
(MED.)
(LO.)
E: FLAP button
NOTE
F: Temperature sensor
(Internal)
G: TEST button
CAUTION
NOTE
6
Remote Control Unit (continued)
: The air conditioner automatically decides the fan speed.
(HI.) : High fan speed
: Medium fan speed
: Low fan speed
1. Use this button to set the airflow direction to a specific angle.
• In the cool mode and dry mode, if the flaps are set in a downward
position, condensation may form and drip around the vent.
• Do not move the flap with your hands.
This function is available only for models ASS, AS2S, ASBS, ACS and
AWS.
Although the temperature sensor in the indoor unit normally detects the
temperature, this internal sensor can detect the temperature around the
remote control unit. For more information, contact the dealer where you
made the purchase. (Do not make any settings if group control is being
used.)
This button is used only when servicing the air conditioner.
Do not use the TEST button for normal operation.
When two remote control units are being used in one group control*
system, the most recent button that is pressed on any remote control unit
is effective.
* Group control means that maximum up to 8 indoor units can be
concurrently controlled with a remote control unit.
OI-724-06EG