Roberts 10-237 Manual De Operación página 2

INTRODUCTION
Your new Roberts stretcher is an improved version of the
"Professional's Choice" Roberts stretchers that have been
used and proven for over thirty years by carpet installers
around the world.
These new stretchers include the following improvements:
• Die cast aluminum components, which are stronger and
higher precision.
• 18" tail blocks with integral wheels for easy re-positioning.
• New, comfortable handle grips.
• Low profile heads for use with knee kickers.
• Adjustable pin depth
The depth of the pins may be adjusted up and down to suit
the type of carpet you are installing. To set the pin depth,
adjust the bar on the pin plate by turning the two adjustment
screws up or down. Make sure the adjustment bar is parallel
to the head.
SPECIAL FEATURES - 10-254(V)
• Locking handle – locks into position by moving lock button
forward. Maintains your stretch position so pattern-matching
and other corrections can be made.
• Swivel head, with five detents, for stretching into corners, or
angles. Setscrew adjusts pressure on the detents.
• Large steel handle for easy positioning of the stretcher head.