Dyson airwrap HS01 Manual De Funcionamiento página 11

This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not attempt to defeat this
safety feature and do not change the plug in
any way.
24. This machine is provided with a protective
device (ALCI- Appliance Leakage Circuit
Interrupter) that may make the machine
inoperable under some abnormal conditions
(such as immersion of the machine). If the
machine becomes inoperable, return the
machine to a service center for examination
and repair.
25. The machine has a reset and test button built
into the plug, which should be operated each
time the machine is plugged in and used. To
test: press the test button. The reset button
will pop out, indicating that the machine is
safe to use. To reset: unplug the machine
and press the reset button. Plug in again to
use your machine.
26. Note – If the ALCI trips while in use, the
machine should be unplugged. Press the
reset button and reinsert the plug into the
outlet. If the ALCI immediately trips for
a second time, unplug the machine and
contact the Dyson Helpline.
27. If the machine does not operate in the
proper functioning condition, it should be
discarded or returned to a service center for
examination and repair.
26.09.2018 14:29 - C99475_HS01_OPMAN_US_X308-OPERATING-MANUAL
11