TRENDnet TE100-PIP Guía De Instalación Rápida página 10

Windows Vista
1. Click on the Windows icon on the bottom left-hand corner of the screen.
2. Click Control Panel.
3. Click Classic View.
4. Click Printers.
5. Right click on the printer and select Properties.
6. Click the Advanced tab.
7. Uncheck Enable advanced printing features.
8. Click Apply.
9. Click OK.
5. I configured my print server to automatically receive an IP Address from a DHCP server, and
now I cannot go into the Print Server's web utility.
Open PS Wizard (See 4. Add the Printer to your PC) to locate your print server's IP Address.
6. How do I setup the TE100-P1P on a Mac?
Type in http://192.168.0.1 in you browser to logon to the built-in web configuration
7. I forgot the administration password. How do I reset my TE100-P1P?
Factory reset the TE100-P1P using the following procedure. This procedure will reset all settings
to default. By default, there is no password.
1. Open up PS Utility.
2. Copy down the last 4 digits of the MAC address.
3. Press the Factory Reset button.
4. When prompted for a password, enter SYSXXXX, where XXXX represents the last 4 digits of the
MAC address. Note: All letters must be uppercase.
If you still encounter problems or have any questions regarding the TE100-P1P, please contact
TRENDnet's Technical Support Department.
8