Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Controlling CD playback
To control CD playback:
•
To pause playback, press
playback, press this button again.
•
To replay the current track, press
remote control or
•
To replay the previous track, press
remote control or
•
To play the next track, press
remote control or
•
To fast-reverse, press and hold
remote control or
Release the button when you reach the track
you want to play.
•
To fast-forward, press and hold
remote control or
Release the button when you reach the track
you want to play.
•
To scan for a track, press INT. Your car deck
plays the first 10 seconds of each track.
When you hear the track you want to play,
press this button again.
•
To play the same track repeatedly, press
RPT. To stop repeat play, press this button
again.
•
To play tracks in random order, press RDM.
To resume normal playback, press this
button again.
Selecting an MP3 file
If the CD your are playing has multiple MP3 files,
you can select the file you want to play.
To select an MP3 file:
•
While the CD is playing, press
remote control or UP or DOWN on your car
deck to select the file you want to play.
Displaying MP3 information
To display MP3 information:
•
While the CD is playing, press DISP one or
more times to display the current time, track
name, directory name, and ID3 information.
Ejecting a CD
To eject a CD:
1 Press REL on your car deck to open the front
panel.
2 Press
to eject the CD.
8
. To resume
on the
on your car deck.
on the
on your car deck twice.
on the
on your car deck.
on the
on your car deck.
on the
on your car deck.
or
on the
www.insignia-products.com
Insignia NS-C5112 CD Car Deck with HD Radio Receiver
Troubleshooting
Problem
No power.
The LCD displays incorrect
information or does not
display any information.
Cannot play radio stations
Radio station reception is
poor.
Cannot insert a CD.
Sound skips.
Note
If the preceding solutions do not solve the
problem, contact authorized service
personnel.
Do not try to repair your car deck yourself.
Maintaining
Replacing the fuse
Make sure that the replacement fuse is of the
same amperage as the original fuse. If you
replace a fuse and the replacement fuse blows,
contact authorized service personnel.
Caution
Never use a fuse with a amperage that is
greater than the original fuse, or you may
damage your car deck.
Cleaning the connector
If the connector between your car deck and the
front panel gets dirty, your car deck may operate
erratically or not at all.
To clean the connector:
1 Turn off the vehicle and remove the key from
the ignition.
2 Remove the front panel. For more
information, see "Removing the front panel"
on page 4.
Solution
Check the fuse. If the fuse has
blown, replace the fuse with a fuse of
the same amperage.
Remove the front panel, then press
the RESET button.
Make sure that the vehicle's antenna
is connected correctly and securely.
Make sure that you are in radio
mode.
Make sure that the vehicle's antenna
is fully extended. If the antenna is
broken, replace it.
Make sure that the vehicle's antenna
is correctly grounded.
Make sure that a CD is not already in
the CD player.
The CD is dirty or damaged.
Publicidad
Capítulos
Tabla de contenido
