Descargar Imprimir esta página

Parts List - BOLERO U430 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Code U430 & CG835:-
Ash Bistro Square Table
UK
UK
Telephone Helpline: 0845 146 2887 (United Kingdom) / 1300 225960 (Australia)
Assembly Instructions:-
Assembly instructions:
1.
Thread a nut onto one threaded end of the threaded bar
2.
Place a washer over the hole on the metal spider on the underside of the table, and insert the threaded end of
the bar
3.
Turn the threaded bar until it securely grips into the metal spider on the underside of the table (do not tighten so
much that the bar presses against the underside of the table itself)
4.
Tighten the nut back down onto the unit using the spanner supplied
5.
Place the aluminium tube over the threaded bar, ensuring that the end of the tube is securely positioned on the
metal spider
6.
Place the aluminium base over the end of the threaded bar, ensuring the notch at the bottom of the tube lines up
with the lug on the table base (as shown in detail A-A)
7.
Place the base weight over the end of the threaded bar
8.
Place a washer and nut on the end of the threaded bar and tighten using the socket spanner
Wood is a natural material whose appearance will deteriorate when left outside. A surface coating is vital in protecting it
from premature cracking / splitting of wood, when exposed to the weather. The finish should be regularly maintained
to ensure that the wood is protected from moisture and the furniture continues to look its best.
In order to maintain the appearance of the wood, regular coatings of teak oil should be applied in accordance with the
instructions supplied with the oil. The frequency will depend on the weather conditions experienced.
If positioned in an exposed position, we recommend the use of a parasol to prevent oils from drying out and flaking.
In order to maintain its appearance, this wooden furniture should be protected from severe weather and stored under
cover during winter. A liberal coating of Oil should be given to the furniture before it is laid up and again when it is
Should you choose not to treat your furniture then it will turn a greyish colour and develop cracks. Light sanding can
restore the original colour after which teak Oil can be regularly applied in accordance with the instructions above.
Maintenance:
This will help maintain the appearance of the table surface.
removed from storage.

Parts list:

1 x Table Top
1 x Table Base
1 x Base weight
2 x Washer
2 x Nut
4 x Feet
1 x Threaded bar
1 x Aluminium tube
1 x Spanner
1 x Socket spanner

Publicidad

loading

Este manual también es adecuado para:

Cg 835