Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Wall Mount Power Board
1. Find a suitable location to mount the power board. Use the included wood
screws
NOTE: Ensure the Wall Mount Power Board is being mounted close enough to
utilise a suitable power point
2. Measure holes for 4 wood screws using a spirit level, with 100mm spacing.
Fit the supplied wood screws
NOTE: Mounting the power board onto plaster or masonry may require
additional screws and components
3. Line up the mounting holes on the back of the power board and place on to
the screws. Gently push down
AFTER SALES SUPPORT
800-372-5715
USA
customercare@balcolifestyle.com
Mounting
7
Publicidad
Capítulos
Tabla de contenido
