Chauvet DJ SlimBEAM QUAD IRC Guía De Referencia Rápida página 2

SlimBEAM™ QUAD IRC QRG
About this
Guide
Disclaimer
Safety Notes
Contact
The SlimBEAM™ QUAD IRC Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. For more
information, download
www.chauvetlighting.com/product-manuals-literature/.
The information and specifications contained in this QRG are subject to change
without notice.
These Safety Notes include important information about installation, use, and
maintenance.
·
Always connect the product to a grounded circuit to avoid the risk of
electrocution.
·
Make sure the power cord is not crimped or damaged.
·
Always disconnect the product from the power source before cleaning it or
replacing the fuse.
·
Never disconnect the product from the power source by pulling or tugging
on the cord.
·
If mounting the product overhead, make sure there is adequate support for
the product's weight, and always secure the product using a safety cable.
·
Make sure there are no flammable materials close to the product when it is
operating.
·
Avoid direct eye exposure to the light source while the product is on.
·
Do not touch the product's housing when the product is operating because
the housing can be very hot.
·
The product is not intended for permanent installation.
·
The product is for indoor use only! It is rated at IP20.
·
Do not expose the product to rain or moisture.
·
Install the product in a location with adequate ventilation, and leave at least
20 in (50 cm) between the product and adjacent surfaces.
·
Do not operate the product at a maximum ambient temperature higher than
104 °F (40 °C).
·
Make sure that the voltage of the power source used for the product is within
the range stated on the sticker or the rear panel of the product.
·
Never connect the product to a dimmer or a rheostat.
·
Replace the product's fuse only with another fuse of the same type and
rating.
·
Never carry the product by the power cord or any moving part.
·
In the event of a serious operating problem, stop using the product
immediately.
·
Never open or repair the product. Repairs carried out by unskilled people
can lead to damage or malfunction.
·
Contact the nearest authorized technical assistance center if the product
malfunctions.
·
To eliminate unnecessary wear and improve the lifespan, during periods of
non-use completely disconnect the product from the power via the breaker
or by unplugging it.
From outside the U.S., UK, Ireland, or Mexico, contact the distributor of record to
request support or return a product. From inside the U.S., UK, Ireland, or Mexico,
use the information in Contact Us
the User Manual from the Chauvet
at the end of this QRG.
2
EN
website