Care and Maintenance
Inspecting
Inspect this fire pit on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this fire pit until the fire is COMPLETELY out and the
fire pit has cooled down.
Check components for any signs of damage or rust.
If any component is damaged, do not operate until repairs are made.
Cleaning
Clean this fire pit on a regular basis to promote safer use and longer product life.
Note: After repeated use, the finish may discolor slightly.
DO NOT attempt to clean this fire pit until the fire is COMPLETELY out and the
fire pit has cooled down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this fire pit in a self-cleaning oven as it may damage
the finish.
Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
Rinse clean with water.
Remove built-up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this fire pit until the fire is COMPLETELY out and cooled down.
Once the fire is out, coals are cold and fire pit is cool to touch, remove ashes
and properly dispose.
Store assembled in a location away from children and pets.
Store the outdoor firepit in a dry location to maximize product life.
5