Sound On/Off - Hahnel CAPTUR Manual De Instrucciones

Captur Module - Timer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Setting up Captur Module - Timer
The Captur Module - Timer is used as an accessory with the
Captur (sold separately) to control the camera wirelessly.
The Captur and the Captur Module - Timer must be channel
matched using DCM. Alternatively you can also connect
the Captur Module - Timer directly to a DSLR camera with a
camera cable (sold separately).
Digital Channel Matching – DCM
a. Transmitter - Press and hold button + Turn 'ON'. LED will
flash green rapidly
b. Timer - Press and hold SET button
show steady red
c. Receiver - Press and hold button + Turn 'ON'. LED will show
Captur Module - Timer

Sound ON/OFF

Button Lock
Delay before shooting starts
Duration of burst/exposure with
continuous/bulb
1st Interval time
Number of shots at 1st Interval
Number of times
program is repeated
2nd Interval time
Low battery indicator
Hours
Minutes
Seconds
Shot count 0 to 999, --- (unlimited)
Shutter release LED
SET button
Toggle Button
(Requires Captur Transmitter)
+ Turn 'ON'. LED will
14
5