Configuration - GROLAB GRONODE HW03 Manual De Instalación

If the connec on between the GroNode If the connec on between the GroNode
EN
module and your networking device was module and your networking device was
correctly established, a yellow Led will light up. correctly established, a yellow Led will light up.
ES
A green one will light up on the GroNode's A green one will light up on the GroNode's
E Ethernet port.
FR
If the module has been correctly connected to If the module has been correctly connected to
the power and the logo (9) is lit in green, but the power and the logo (9) is lit in green, but
the Ethernet port LEDs do not light up (a er the Ethernet port LEDs do not light up (a er
following the steps to connect it to your following the steps to connect it to your
router), there may be a network connec on router), there may be a network connec on
p problem. Contact our technical services.

CONFIGURATION

S So ware installa on
Open the USB Pendrive (17), insert it in your Open the USB Pendrive (17), insert it in your
computer and run the installa on program. c
It is possible that your opera ng system will It is possible that your opera ng system will
s show an unknown so ware safety message.
9
17
2
9