Assembly Instructions - Insignia NS-HWD1636 Guia Del Usuario

ASSEMBLY INSTRUCTIONS

Step 1: Preparing the upper skirts
Caution: Assemble your stand on a carpeted floor or on the empty carton to avoid scratching your stand.
• Insert a connector screw (8S) into each hidden connector (5F), then use a hammer to tap a hidden connector and
screw assembly into the large holes in the upper long skirts (H) and upper short skirts (J).
Note: Make sure that the threads in the connector screws (8S) are pointing straight out, away from the wood part.
5F
You'll need:
6
5F
8S
8S (8)
5F (8)
www.insigniaproducts.com
36" Espresso Finish Open Frame TV Stand
Hammer