Technical Data - Alpina SF-9353 Instrucciones De Uso

ENGLISH
• A correct operation of the appliance is obtained when the radiator is installed vertically. Do
not switch on the fan heater near pieces of furniture, curtains shelves, etc.
• Do not use the appliance near liquids or any flammable materials.
• Never operate the appliance immediately below an outlet.
• ATTENTION: Do not connect the appliance to a device switching the appliance
automatically on such as a thermal control device or a time switch to avoid overheating
risks when the radiator is moved or covered.
• Do not cover the appliance when it is running to avoid overheating risks.
• In case the power cord is damaged send it to the nearest after sale service recommended
by the manufacturer for the replacement.
• Children, old people and disabled people are not often aware of the dangers, which can
derive from improper use of the appliance. The appliance should never be used without an
adult supervision.
• Do not connect the appliance to extension cords or multiple outlets.
• Do not damage and do not kink the power cord.
• Before cleaning the appliance or carrying out any maintenance switch off the whole
system.
If the appliance is out of order, switch it off immediately. Do not tamper with it. Always use
original spare parts, otherwise safety of the product can be compromised.
ASSEMBLY
Assemble the body frame and the base plate together as the following sequences.
Remove the butterfly nuts from the lower part of the body frame.
Insert the power cord through the slot placed in the middle part of the basement and then
assemble the body frame to the base plate.
Secure the body frame to the base plate by means of the two butterfly nuts previously
removed. Insert the power cord through the suitable slots and then fix it by the clamp.
OPERATION
Plug in the appliance: Check that the outlet has at least a 10 Ampere current carrying
capacity.
Models with switches
Select the speed by suitable switches. Press the oscillating switch to make the radiator
oscillate. Press it again to switch off the oscillating movement of the appliance.
The radiator can be activated manually by pressing the handle situated in the rear part of the
appliance.
SAFETY DEVICE
This appliance is provided with two safety devices: the first device disconnects the appliance
when the radiator is tilted or when is tipped by means of a switch situated in the lower part of
the radiator. The second safety device disconnects the appliance in case of overheating by
means of a thermo fuse.
MAINTENANCE
The appliance needs only an regular cleaning.
After use and before cleaning always unplug the appliance and wait till the item is cool.
Clean the grilles from dust.
Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.

TECHNICAL DATA

Model:
Voltage:
Power consumption: 400/800/1200W
Dimensions:
Weight:
HQH-04
220-240 V, 50/60 Hz
355x170x575 mm
2,8 kg
- 4 -