Camera Adjustment - Dedicated Micros 1000 Manual De Instalación

5. Camera Adjustment

1
Once the dome has been fixed to the ceiling it can be manually adjusted in both the pan & tilt axis
as follows.
1. Remove the plastic bungs (if fitted) from the adjustment holes and insert the 5mm
A/F hexagon key supplied into the pan adjustment access hole.
2. Rotate the key to adjust the position of the pan axis.
3
3. Similarly, the tilt adjustment is achieved by inserting the 5mm hex key in
the tilt axis adjustment hole.
1000 Installation Manual
2
4
Page. 6