Adjusting The End Limits; Use - SOMFY Sonesse 40 PA Guia De Instalacion

4.2 Adjusting the end limits
The limits can be set in any sequence.
1) Up limit
Press the control point UP button to raise the
shade to the Up limit and turn the corresponding
adjustment screw to set this limit.
2) Down limit
Press the control point DOWN button to lower the
shade to the Down limit and turn the correspon-
ding adjustment screw to set this limit.

5 Use

Up, Down & Stop
1) To move the shade from a limit to the other
limit, press briefly the UP or DOWN button.
2) To stop the shade, press the STOP button.
6 Copyright © 2011 Somfy SAS. All rights reserved - V0 - 06/2011
1
2