Governing Requirements; Labels/Identification/Inspection Records; Equipment Records - Werner A1003 Serie Para El Usuario

7. TRAINING: This equipment is to be used by persons who have
been properly trained in its correct application and use.
d. governing requirements
Refer to applicable local, state, and federal (OSHA) requirements
governing this equipment for more information on anchorages
and associated system components, including; ANSI Z359.1, and
OSHA 1910.66, appendix C.
IV. labels/Identiication/Inspection records
a. All products should be inspected by the user thoroughly before
each use. Additional inspections by a competent person other than
the user should be conducted at least annually. That interval should
be shortened any time the product is used in a harsh environment
or is exposed to conditions such as chemicals, abrasion, heat or
any other factor that could affect the strength of any of the materials
or components.
b. This manual should always accompany the product, or be on ile
with the employer for access when needed. Record the identiication
details for the carabiner and record the inspections in the inspection
log, on page 14. It is important to keep this log current, complete,
and available as needed.
V. equipment record
PART NUMBER
DATE
MANUFACTURED
Werner Manual Carabiner
Certiied to meet ANSI Z359-2007, and OSHA 1910 and 1926 standards
and regulations for the subsystem components of a complete personal fall
arrest system.
PURCHASE DATE
ASSIGNED TO
SPECIFICATIONS
CARABINER
USER INSTRUCTIONS
Page 13