Safety Regulations; Intended Use; Technical Data - EINHELL 45.004.80 Manual De Instrucciones

Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.

1. Safety regulations

Use the helmet only after it has been correctly
adjusted to ensure that it offers you full
protection.
Use only additional parts that have been
recommended by the manufacturer. Do not
modify the helmet in any way to facilitate the
installation of other accessories.
Keep the helmet away from liquids that contain
solvents or alcohol, such as sprays, coatings,
etc. These may damage the plastic. Apply labels
to the helmet only with water, acrylic or rubber-
based adhesives. The helmet must not be
painted or coated.
Impacts and blows may cause damage to the
helmet that cannot be seen from the outside (for
example hairline cracks). In such cases the
helmet may not provide full protection. Replace
the helmet immediately after it has been
subjected to any great stresses.
Use the ear protectors for as long as the noise
level is high. It will only provide full protection if it
is worn throughout such noise.
Each time before you use the helmet and the
accessories, examine them for signs of damage
such as cracks, ruptures, chafing, etc. Use the
helmet and accessories only if they are in perfect
condition.
2. Layout and items supplied (Fig. 1/2)
1. Exterior shell
2. Visor
3. Ear protectors
4. Ear protector adjuster
5. Neck strap adjuster
6. Four-point strap

3. Intended use

The safety helmet protects the wearer from head
injuries caused by falling or swinging objects and by
blows against fixed objects.
The helmet may be used only for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our helmets have not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
helmet is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Head circumference:
Weight:
Ear protection:
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Frequency (Hz)
Average sound insulation (dB)
Standard deviation (dB)
Assumed sound protection (APV) (dB)
Recommended level range:
High (H)
Medium (M)
GB
52-64 cm
720 g
125
9,8
3,0
6,8
250
14,0
1,2
12,8
500
22,8
2,2
20,6
1000
30,4
3,4
27,0
2000
31,6
3,3
28,3
4000
33,6
3,4
30,2
8000
31,3
2,7
28,6
= 29 dB
= 22 dB
7