Norlake DAIRY QUEEN BLIZZARD STATION ZR112 Instrucciones De Instalación, Operación Y Mantenimiento página 2

Unit
Model
ZR112
ELECTRICAL
Check the proposed outlet to be used to insure that the voltage, phase, and current
carrying capacity of the circuit from the electrical panel correspond to the requirements of
the cabinet. Never use an extension cord to run power to the unit. Refer to the serial tag
for all pertinent electrical information.
Observe all Warning Labels. Disconnect power supply to eliminate electrical shock
and injury from moving parts when servicing equipment.
The Blizzard Merchandising Cabinet employs a cold wall evaporator located inside the
topping rail. During the refrigeration process, heat is removed through the evaporator
tubing and expelled through the condensing unit. In order to assure proper airflow, make
certain the flow of air behind the cabinet and through the front louver is not restricted.
The refrigeration system on this cabinet uses a temperature thermostat that senses the
cut-in and cut-out temperatures of the cold wall evaporator coil. The topping rail
temperature can be adjusted by turning the thermostat control knob that is located on the
inside of the cabinet on the condenser cover.
Physical Specifications
Exterior Dimensions
Width x Depth x Height
54" x 32" x 44-3/4"
Electrical Data
Unit Type of
Model Connection
ZR112
OPERATION
Volt/Hz/Ph
Cord
2
Refrigerant
Type/Amount
See Serial Tag
115/60/1