Publicidad
Idiomas disponibles
Idiomas disponibles
this product, or require further assistance please do not hesitate to contact our trained professionals operating the
customer support line 1-888-478-6435 or email to info@sunforceproducts.com.
2.5 Watt Solar 12 Volt Battery Maintainer:
What's included: Alligator battery clamps, 7.5 ft. of wire, 12V DC plug, & suction cups (to mount panel onto
windshield)
Power Rating: Maximum rating 2.5 Watts (under ideal conditions)
Current: 167 mA @ 15Volts
Features:
•
Quickly connects and disconnects to the battery
•
Overcharge and Discharge protected
•
Does not need direct sunlight; amorphous solar panel will work in cloudy conditions
•
Weatherproof design
•
Durable – covered by a five year warranty
•
Maintenance free, lightweight compact design
Operating Instructions
For optimal power, ensure the panel is directly facing the sunlight.
WARNING:
•
Follow the below instructions carefully to not cause any bodily harm
•
Correct polarity must be observed for product to function properly and safely
•
Risk of fire, electric shock, and injury to persons if operating instructions are not followed
•
Any misuse or tampering of the product and/or any included accessories will void warranty and may cause
bodily harm
•
Follow all safety instructions provided by the battery manufacturer when handling 12V batteries. Always
wear safety glasses. Keep sparks, flames and cigarettes away from batteries at all times.
Installation:
Your 2.5 Watt Solar 12 Volt Battery Maintainer may be installed using either the 12V DC Plug, Alligator Battery
Clamps and the Mounting Suction Cups.
(1) Installation through 12V DC Plug:
The 12V DC Plug is for connecting the Solar Battery Maintainer to the vehicle battery through a 12V socket. Plug
the "Quick Connect" end of the 12V DC Plug into the Quick Connect of the solar panel then insert the plug into the
12V DC socket in vehicle. Make sure both ends are secure and aligned correctly. The 12V Socket in the vehicle
must remain live when the ignition is in the "off" position for the solar panel to charge.
(2) Installation to Battery by Alligator Battery Clamps:
The Alligator Battery Clamps are for a direct connection to the vehicle battery terminals. Plug the "Quick Connect"
end of the Alligator Battery Clamps into the Quick Connect of the solar panel. Then, connect the alligator clamps
correctly to the 12V battery by matching the red clamp (Positive (+)) to the Positive (+) terminal on your battery.
Connect the black Clamp
WARNING: Alligator clips must be placed on the battery in the aforementioned order. Wrong connections may
cause sparking or explosion.
(3) Mounting With Suction Cups to the Windshield:
Insert the 2 Suction Cups into the pre-drilled ends of the solar panel. Make sure they are secured properly in the
panel. Choose a location preferably facing the sunlight and attach to the windshield or other glass surface. For
best results, ensure windshield is dry, clean, at room temperature, and slightly lubricate the suction cups before
mounting.
Note: This solar battery maintainer has a built-in blocking diode to prevent discharge.
( Negative (-)) to the Negative (-) Terminal on your battery.
Publicidad
