Packaged Items
Make sure your box contains everything listed. If any pieces are missing, contact
your dealer.
• Camera unit x 1
• Attachment x 1
(Application model: U321H)
• Gasket x 1
(Application model : U321H)
• Holder x 1
• Cover x 1
The holder and the cover are assembled.
NOTE
• Download the driver and the calibration software from our website to install them on the computer.
URL: http://www.nec-display.com/dl/en/index.html
• Drawing software is required to use the interactive white board function.
No drawing software is included with the product. Get commercially available drawing software.
• Stylus pen x 2
• USB cable x 1
For charging the stylus pen
• USB cable (4.5 m/14.8 feet) x 1
For connecting the computer with the
camera unit
• Installation Manual (this document) x 1
• Screw (M3) x 4
ENG-6