Transport And Storage Conditions - SDI RADII XPERT Manual Del Usuario

Tabla de contenido

Idiomas disponibles

ENGLISH

SAFETY, WARNINGS & CAUTIONS

Use of the Radii Xpert is restricted to qualified medical professionals in accordance with the safety instructions below:

Do not open or alter the Radii Xpert in anyway. Only dealers authorised by SDI Ltd may open the housing and repair

the device.

2. Do not introduce any objects into the unit with the exception of replacement parts handled in accordance with this manual.

SHOCK HAZARD

3. Only charge the Radii Xpert handpiece in the Radii Xpert charger.

4. Connect the power plug into a suitable grounded and approved outlet.

5. Always unplug the power to the charger during cleaning of the unit.

6. Do not use damaged power cord.

Should you have any reason to suspect the safety of the Radii Xpert to be compromised, the unit must be taken out of operation

and appropriately labelled to prevent third parties from inadvertently using a potential defective unit.

The Radii Xpert emits a high intensity light and must only be used as indicated in this manual.

2. Do not look directly into the light source.

3. Operator, assistants and patient must always wear appropriate blue light

HIGH INTENSITY

blocking eye protection or use a blue light blocking light shield.

LIGHT

4. Restrict exposure to the oral cavity in which clinical treatment is intended.

5. Avoid direct contact of curing tip with soft tissues and mucosa.

6. The tip of the LED attachment is the only emission aperture that

relates to the above hazard warnings

Radii Xpert can only be operated with the supplied LED tip and is not compatible with previous Radii model

of LED attachments.

2. Condensation resulting from unit being transferred from a cold to a warm environment may be a potential risk.

The unit should only be turned on after it is completely equilibrated to ambient temperature.

CAUTION

3. Use only genuine SDI Ltd parts when replacing defective components as directed in this manual.

4. Do not operate the unit in the proximity of flammable mixtures.

5. Keep solvents, flammable liquids and sources of intense heat away from the unit as they may damage the

plastic housing.

6. Do not allow cleaning agents to enter the Radii Xpert as this may short circuit the unit.

Do not use the Radii Xpert in patients or by users:

a. with heart pacemaker implants who have been advised to be cautious with regard to their exposure to small electrical

devices.

b. with a history of photo biological reactions (including individuals with urticaria solaris or erythropoietic protoporphyria) or

who are currently on photo-sensitising medication (including 8-methoxypsoralen or dimethylchlorotetracycline).

who have history of retinal disease.

d. who have had surgery for eye cataracts.

Seek advice from their prescribing medical practitioner prior to operating the Radii Xpert on these patients.

8. Prior to each use of the Radii Xpert, ensure that the emitted intensity is sufficient to safely guarantee polymerization.

9. The Radii Xpert was developed and tested in accordance to relevant EMC regulations and standards to conform with legal

requirements. Due to variables that may exist within the work environment, such as power supply, wiring and the ambient

conditions that can affect the EMC properties of the Radii Xpert, EMC disruption may occur. If this happens, move the unit to a

different location.

10. SDI Ltd accepts no liability for any damage resulting from the use of the Radii Xpert for any other purpose than the polymerization

of light-cured dental materials.