Installation Of Camera Drivers And Software On Your Pc; How To Test Your Camera; Select The Right Driver - VWR isiCam WIFI83 Manual De Instrucciones

Installation of camera drivers and software on your PC

1. Operating system requirements: all the Windows O.S.
2. Please insert your CD and run:
\VisiCam\ setup.exe
3.
Now the VisiCam icon appears on your desktop.
4.
You don't need to install any driver.
5.
Plug the Camera in your PC: the camera will be identified automatically.

How to test your Camera

In order to check if your Camera works correctly, it's not necessary to put it into the microscope: it's enough to
connect it into the USB port, run Vision Lite using the icon on your desktop, select the right driver and check
whether the shown image is not totally black.

Select the right driver

Please select: USB 2.0 YW500 camera.
With VisiCam you have to tell the Software which is the Driver by selecting the microscope-shaped icon. With
Optika IsView the live image coming from your camera will automatically appear.
Getting started with VisiCam, a very easy measuring and documentation software.
Run VisiCam by clicking on its icon on your desktop, as below:
Select the right Driver for capturing the image:
4